Skip to main content

Windows 8 Metro Apps Proxy settings

Case 1: If you are on a internet connection that doesn't require any proxy settings, everything works fine.

Case 2: If your internet connection requires some proxy settings(without authentication), then try this method:
Open internet explorer and set the proxy under Internet Options>Connections>Lan Settings.

Now open Command Prompt with Administrative privileges(On start screen type "command prompt", right click on the command prompt app and click on "Run as administrator" which is visible on the bottom of the screen). Now type the following command and press enter.

netsh winhttp import proxy source=ie

Restart the PC and check out.

Case 3: If your internet connection requires some proxy settings with username and password, then try this method:
  1. Install fiddler
  2. Now please install this addon
  3. Open fiddler and click on Win8 config, then click "Excempt All"
  4. Restart your system
  5. Set the proxy details in proxyfier or proxyfire
  6. Always open fiddler first and you can use it in tray with CTRL+M, then proxyfier(remove from startup)

Now you are ready to use metro apps with proxy settings.
Labels:

Comments

Post a Comment

Popular posts from this blog

Karabiner: Mouse/keyboard customizer for OS X

For beginners, or the one who migrated from Windows environment, Natural Gestures (Scrolling and Swiping) might be bit confusing. But, once you get familiarized with them, it may feel like "What was I doing, all those days?". It all changed, when I connected external mouse to my Macbook. When you start using that WHEEL, you will be confused. Luckily there is a setting for mouse, to change scroll behavior (natural or the other way). But, here's the catch. If you toggle that setting, it also toggles the same for TRACKPAD!!!!! I've seen that many people were freaked out and even raised BUG report to Apple. But, all those reports were closed, saying that is not a bug, but intentional feature!!! For those, who can't leave with such one-sided settings, here is a simple util, which came to my rescue: Karabiner It's simple, powerful and stable mouse/keyboard customizer for OSX. Without going into much detail, here's the configuration I used to ret...
Post a Comment
Read more

OS X 10.8 Mountain Lion bootable USB (without MAC)

Download the raw file from here . How to use: 1 - Copy the .raw file to an USB stick using  SUSE Studio Image Writer . If you have error during copy, eject and re-connect the pen drive. When Windows asks if you want to format it, cancel and run Image Writer again. If the problem persists, disable your anti-virus software, it may be blocking raw write to the drive. Another Image Writer for Windows, if SUSE doesn't work https://launchpad.net/win32-image-writer/+download 2 - Boot the USB drive and install. If you need, type  boot options , for example: -v (verbose boot) [default] -x (safe) -s (single user) GraphicsEnabler=yes (enable graphics card drivers) [default] USBBusFix=yes (fix problems with USB devices) npci=0x2000 (use if boot stops at "PCI configuration begin") cpus=1 If you need, use  TransMac  to remove kexts which are causing problems (System/Library/Extensions) and use the flag -f (ignore caches) at boot, or remove /System/Libra...
6 comments
Read more

USB port not working on Mac

Recently I connected  an external hard-disk   to my new MacBook and observed that it was not properly detected on one of the USB ports. But I can see that it is powering my HDD. I tried switching to other port and it worked. I simply ignored it by thinking that my HDD cable might be loose. Now I bought a new USB drive and to get it detected, I have to insert and detach it multiple times. And as usual, I suspected the new USB drive, as my Mac is brand new. And planned to replace my USB drive. Now my HDD came back to   my mind. And also my earlier laptop, in which few KEYS went unresponsive due to accumulated charges. By little researching I found that I'm not alone. The solution that worked for me was "Resetting SMC" Here is the procedure I followed: Shut down the Mac and connect the power cable Hold down Shift+Control+Option+Power concurrently for a few seconds. When the light on the power adapter blinks or changes colors you’ll know SMC r...
Post a Comment
Read more